1. Cut a piece of French Wire approximately 1/2 inch long for each end of your project. 2. If you are using a crimp bead or tube, place it on the stringing material before you add the piece of French Wire. 3. Place the piece of French wire onto your stringing material. 4. Add your finding to the French Wire-covered stringing material. 5. Pass the stringing material back through the crimp bead/tube, pull the stringing material tight and crimp your tube.6. If you are using thread and not using a crimp tube, then pass the thread back through the last bead added to the project, and knot it tightly, making sure that you have pulled teh thread tight and compressed the coils of the French Wire. 7. Repeat on the other side of the project.
Rollover to Zoom